Medical Imaging & Healthcare Engineering
rfq@suncareco.tech+966 56 944 8859
Services · Pre-Installation

Pre-Installation & Site Preparation

Translate manufacturer requirements into a coordinated engineering scope and an imaging room ready for installation.

05Modalities we prepare rooms for
OEM-ledEvery decision traced to the manufacturer's specification
One scopeElectrical, HVAC, shielding and network in a single plan
Shielding work, the control window and the finished MRI room
Before the system arrives

The room is part of the machine.

Power quality, cooling, shielding and the route through the building decide how well a scanner performs for the next decade. We read the manufacturer's site requirements and turn them into work the contractors can build.

  • Room layout with service clearances and access route
  • Electrical loads, PDU/UPS and grounding requirements
  • HVAC, radiation and RF shielding coordination
  • Network and PACS readiness signed off before delivery
SITE PREPARATION, PHOTOGRAPHED

Rooms we prepared.

RF and radiation shielding, floors, doors, windows, power and ceiling services — from the bare shell to the room the scanner arrives into.

An RF-shielded MRI room with its shielded window and door
An RF-shielded MRI room with its shielded window and door
Shielding panels, floor tracks and copper RF tape going in
Shielding panels, floor tracks and copper RF tape going in
From a bare shielded shell to a working MRI room
From a bare shielded shell to a working MRI room
RF-shielded enclosures: panel joints, floors, doors and window frames
RF-shielded enclosures: panel joints, floors, doors and window frames
Shielding work, the control window and the finished MRI room
Shielding work, the control window and the finished MRI room
A CT suite with its control room, electrical room and chiller plant
A CT suite with its control room, electrical room and chiller plant
Finished CT, MRI, X-ray and mammography rooms
Finished CT, MRI, X-ray and mammography rooms
The structural shielding frame, ceiling services and the finished suite
The structural shielding frame, ceiling services and the finished suite
Slab preparation and ceiling-mounted services before handover
Slab preparation and ceiling-mounted services before handover
Setting out the shielded room, then the commissioned cath lab
Setting out the shielded room, then the commissioned cath lab
By modality

Each system has its own site rules.

MRI Pre-Installation

Coordinate magnet, equipment and control rooms; RF shielding and penetrations; helium vent requirements where applicable; cooling, power, grounding, access and safety zoning.

Process

From the OEM document to a ready room.

  1. OEM review

    Site requirements, drawings and interface points extracted from the manufacturer's documentation.

  2. Site survey

    The existing room, services and access route measured against them.

  3. Engineering review

    Electrical, HVAC, structural, shielding and network scope defined and coordinated.

  4. Quantities & site works

    Bills of quantities, contractor coordination and follow-up while the works proceed.

  5. Final readiness

    Every interface verified and signed off before the delivery date is confirmed.

Healthcare Engineering

The disciplines we coordinate.

Electrical & UPSHVAC & CoolingGrounding & interfacesCable Routes & NetworkRadiation & RF shielding coordinationFinal Site Readiness
Related work

Site readiness, in practice.

All projects
New room, new system?

Send the manufacturer's site document.
We will tell you what the room needs.

Start a site reviewInstallation & commissioning

QR

Contact QR code

Scan this code from another device.